Home elevators are a special type of elevator that has very high requirements for the user's use environment and purpose. Therefore, there are always some special requirements in the design process. So, what should be considered in the design of home elevators? What are the special design requirements for home elevators?1.The hoistway of a home elevator occupies a small area. In private residences such as villas and houses, since the number of people using home elevators is small, a large bridge compartment is not required, and users do not want to occupy too much living space, so the hoistway of a home elevator should be as small as possible. At the same time, due to the high number of floors, a sufficiently deep pit cannot be provided, nor can a large roof space be provided.

2. Low speed and comfort. Home elevators have a lower speed and a smaller lifting height, which can not only bring better comfort to users, but also prevent frequent vibrations.

3. Low noise. The residential elevator is installed inside the house. It can be adjacent to the bedroom or lounge, or even in the bedroom, so its noise requirements are much higher than those of ordinary elevators.

4. Life-saving equipment should be equipped. If someone in the family takes the elevator alone and no one is at home, and the elevator breaks down, it is necessary to install the elevator self-rescue function, which includes power-off and leveling after a power outage. Users can use the elevator self-rescue system to send the elevator to the leveling floor, thereby achieving the purpose of self-rescue.

5. Manual doors without hanging doors. Some home elevators use manual doors according to user requirements and do not have car doors. This is to save space and save costs.

6. Answering remote calls. This function is a must-have for home elevators. In the event that the elevator is trapped, no one is at home, and rescue is impossible, you can seek help from outside.

Therefore, when designing a home elevator, you must pay attention to certain specific design requirements and install it according to these requirements.