There are many types and models of home elevators in the villa area . When purchasing, you need to choose the appropriate elevator size and load-bearing ratio according to the specific situation. There are relevant instructions for the reserved size instructions for home elevator installation. When making a specific choice, the editor can compare and see how big it is more suitable and the size is just right to meet the needs

1.Classification of home elevators

Different classifications determine the structure and size of the elevator. What kind of classification you choose, depending on the configuration, the size also has a lot of room for choice. Imported villa elevators are divided into hydraulic, traction and screw. The elevator structure consists of a hoistway and pit, a lifting platform or car, floor stations, etc. The more floor stations there are, the higher the size and height.

2. How to reserve size?

Villas are usually not occupied by many people, so the smallest size can meet the needs of three people. Generally, the clearance size of the well is 1450×1450mm, and the load capacity is 250kg. However, the structure of the well, as well as columns, walls, etc., must still be considered, so a space of 1600×1600mm is more suitable.

If the size of the lifting channel is too small, the elevator cannot be installed. The specific size of the imported villa elevator needs to be consulted in detail by professionals to confirm the safety of the installation and ensure future use. When purchasing a home elevator, you cannot choose according to the size of the elevator commonly used by residents, but should choose according to the height of the villa floor.

3. It needs to be calculated based on the load conditions.

When installing a home elevator in a villa area, the size is generally calculated according to the load capacity. Generally, the villa area has 3-4 floors. When the load capacity is less than 400 kg, the shaft size can reach 1500mmX1500mm, and the top floor height can reach 2600mm. This is a relatively standard size.

As far as the form of home elevators is concerned, traction elevators are more common, and the minimum size of this type of elevator should be 1430mm wide x 1250mm deep, the car width 850x 1100mm deep, etc. But these are all reference sizes, and the specific size needs to be selected according to the height of the villa floor.

The editor of Viadi recommends that you can refer to the above points when installing a home elevator. If the location where the elevator is installed is different, the size will also be different. Everyone must thoroughly understand the size of the home elevator in order to install a suitable elevator at home.